Kort Thrusters

The Kort thruster range has evolved in response to customer demand.


Our reputation is for provision of impartial advice and effective propulsion packages which have grown to include our range of tunnelthrusters and small azimuthing propulsion units.


These are designed for hydraulic drive up to a maximum of 300HP input power.

Kort Range

Our thrusters are primarily designed for commercial displacement vessels but have been successfully fitted to planing craft and inland waterways pleasure craft.


Long service life and ease of maintenance have been key factors in design and development.


Models KT30-KT170 have the hydraulic motor fitted in the drive housing directly coupled to the propeller shaft which runs in taper roller bearings housed in the nose cone assembly. These are pre fitted and tested prior to delivery.



Models KT200-KT300 have a lower gearbox within the tunnel with the hydraulic motor plugged into the input housing inside the vessel. These larger units can also have diesel drive via a cardan shaft and right angle gearbox. A range of ratios is available to suit engine rating.


All models can be supplied to suit a range of system operating pressures and can be integrated with either closed loop or open loop hydraulic systems.


All units are supplied with a comprehensive instruction manual.


Our joint experience working with shipbuilders and repairers has influenced the design of our thrusters, resulting in lower installation costs and more reliable commissioning.


Hydraulic services and testing can be carried out on site in conjunction with Hercules Hydraulics.


All models can be supplied to suit either 210 or 280 bar system pressure and can be integrated with either closed loop or open loop hydraulic systems.


Tunnels are supplied in standard lengths in mild steel, aluminum or grp with stainless steel ring in way of the propeller.

Wheelhouse controls

Our intelligent wheelhouse controller gives big boat performance at small boat cost.


The Thruster Controller is a 24V DC unit, seadled to IP65 standards for wheelhouse or protected external locations only. Thrust control is via a proportional "put and stay" joystick. Each unit can be selected for duty or set to standby and monitors four alarms. The unit is pre-wired, tested and supplied with plugs and two metres of cable.


Incorporating a proportional control, warning lights and a test for alarm it can be integrated with an autopilot and either single or multi-station systems with full control can be supplied.

Installation & Maintenance

All units are supplied with a comprehensive instruction manual.


Experience working with shipbuilders and repairers has been a central factor in the design of Kort Thrusters resulting in lower installation costs and more reliable commissioning which can normally be carried out unsupervised.

Hydraulic Tunnel Thrusters

Model Propeller Input
(kW)
Thrust
(Kg)
A
(mm)
B
(mm)
KT30 375 19 320 800 406
KT45 375 27 420 800 406
KT70 505 28 500 900 559
KT90 505 37 620 900 559
KT120 505 56 800 900 559
KT140 700 53 970 1250 762
KT170 700 88 1360 1250 762
KT150 750 105 1625 1500 813
KT200 750 123 1845 1500 813
KT250 750 170 2235 1500 813
KT300 750 223 2700 1500 813

Thrusters Datasheets

KT30 Datasheet

KT45 Datasheet

KT70 Datasheet

KT90 Datasheet

KT120 Datasheet

KT140 Datasheet

KT170 Datasheet

KT200 Datasheet

KT250 Datasheet

KT300 Datasheet

Kort Propulsion Co Ltd, The Boat House, 20 High Street, Erith, Kent DA8 1QY, United Kingdom


t: 01322 346346 | f: 01322 347346 | e: info@kortpropulsion.com


T & C's | Sitemap

Website by Tiga Creative Marketing, Kent UK